Pipe Hydraulic External Alignment Clamps
Pipe Hydraulic External Alignment Clamps are essential construction equipment in the pipeline construction process, and are widely used in the installation and construction of pipeline joints, pipe mouth assembly, and station fittings. The notable feature of the external alignment device is that it relies on manual power, has a simple structure, and is easy to operate, making it highly popular among construction units. Due to the manual hydraulic top fixed on the external aligning device of the hydraulic fastening pipeline, the weight is relatively heavy. It is very laborious to move the aligning device body, and the clamping block in contact with the pipeline is made of metal material. When compressing the pipeline, it is easy to damage the surface of the pipeline.
Pipe Hydraulic External Alignment Clamps
Working principle of Pipe Hydraulic External Alignment Clamps
ZH Pipe Hydraulic External Alignment Clamps discloses a hydraulic fastening pipeline external alignment device. The lower part of the upper alignment ring is hinged with a lower alignment ring through a hinge shaft. The left end of the lower alignment ring and the left end of the upper alignment ring are both hinged blocks. The right side of the upper alignment ring is welded with a fixed block, and a manual hydraulic pressure top is installed above the fixed block through screws. The upper middle part of the manual hydraulic top is a lifting rod, and the upper part of the lifting rod is screwed with a pulling piece, which includes a sleeve, a ball, and a pull rod, The upper and middle part of the pull rod is the inner joint, and the outer side of the inner joint is connected to a sleeve by rolling with a ball. The inner surface of the sleeve and the outer surface of the inner joint are equipped with corresponding rolling grooves. The ball is located in the rolling groove, and the lower part of the sleeve is a screw joint sleeve. The right side of the lower ring is welded with a connecting rod, and the right side of the connecting rod is in an arc-shaped structure. The combination of additional blocks and moving beads facilitates the movement of the aligning device body, and the installation of flexible pipeline protection sleeves avoids damage to the pipeline caused by metal material compression blocks.
Structure of ZH Pipe Hydraulic External Alignment Clamps
Hydraulic Pipe External Alignment Clamps: High-strength steel structure, bolted, Hydraulic device.
Pipe Hydraulic External Alignment Clamps
Technical Parameters of ZH Pipe Hydraulic External Alignment Clamps
Pipe Size:168-1422mm
Structure: Hydraulic
Corrosion Resistant: Yes
Working Temperature:-50℃`+60℃
Features & Benefits of ZH Pipe Hydraulic External Alignment Clamps
- ZH Pipe Hydraulic External Alignment Clamps Standard no tack design. No-tack cross bars are arched to permit a full-circle weld without removing the clamp. The no-tack clamp can help increase welding quality and efficiency.
- Available for Pipe Size of ZH Pipe Hydraulic External Alignment Clamps through 56 inch.
- ZH Pipe Hydraulic External Alignment Clamps choose high strength material for Pipe External Alignment Clamps to ensures sturdily precision built for full round or tack welding.
- Accurate installation within a few minutes.
- ZH Pipe Hydraulic External Alignment Clamps is easy to operate external hydraulic center.
- Rotating gyroscope system design to prevent dust and dirt from entering.
